アルミニウム押出メーカーはどのように押出プロセスを実行しますか？

アルミ押し出しとは何ですか？

For アルミニウム押出成形メーカー押出成形は、固定断面のプロファイルを作成するプロセスです。 材料は、断面のあるダイを通して押したり引いたりします。 このページでは、3D CAD設計から特殊技術まで、アルミニウム押出成形に関連するすべてのトピックを取り上げます。

アルミ押出メーカーはどのように押出プロセスを行っていますか？

アルミニウムプロファイルの押し出し技術は、次の点で構成されています。

1. プレス設備は作業のために準備されています。
2. 技術ツール（プレスワッシャー、マトリックスホルダー、ダイ、ワッシャー、サポートリング、圧力残留物を除去するためのナイフ）は、作業用に準備されています。
3. プレスツールは、石の抵抗炉で加熱されます。
4. アルミニウムインゴットはガス炉に入れられ、加熱されます。
5. プロファイルが押されました。
6. ストレッチ機の助けを借りて、プロファイルはまっすぐになります。
7. プロファイルは長さにカットされます。
8. カットされたプロファイルはバスケットに入れられ、エージングオーブンに送られます。

アルミ押出メーカーはエージング工程を行っています。 これは、完成したプロファイルの熱処理プロセスです。 さらに、プロファイルを高温で加熱および維持した後、空気中で冷却することで構成されます。

なぜアルミニウム押し出し？

The extrusion method allows you to end up with finished products with high strength rates. Similarly, it gives you confidence that your property will be reliably protected. The extrusion technology not only gives aluminum high strength, but also allows the profile to be reinforced with stiffening ribs. Due to which the protective roller shutters show such high results when tested for impact resistance.

The extrusion of a metal profile is the process of forcing or pulling an alloy through forming holes (matrix) under high hydraulic pressure. An aluminum extrusion manufacturer carries it in order to obtain a profile with a given cross-section.

The technological process of extrusion is carried out in extruders - devices for continuous processing of raw materials. The extruder for forming metal for the production of a profile consists of a:

• body with heating elements
• a screw that feeds the material into the extruder
• a temperature control system

 Depending on the number of screws, extruders are subdivided into:

• One
• Two
• three-screw

The main types of extruders, differing in the type of material supply, are disk and piston.

Different stages of aluminum extrusion of an aluminum profile

An アルミ押出メーカー begins the extrusion of a profile with warming up the equipment. It is followed by the process of:

• pressing the profile
• then quenching by cooling with air
• straightening the metal profile by stretching
• cutting the profile in accordance with the measured length

The finished profile is subjected to aging - artificial or natural. The type of aging is determined by processing at different temperatures. The quality of the finished metal profile is determined by the absence of scratches and bubbles on the surface of the profile.  The durability of an aluminum or steel profile provides resistance to temperature and operational influences - up to 40 years.

According to expert アルミニウム押出成形メーカー“Extruded profiles are subdivided into:

• solid and
• hollow

This process goes according to the type of material - without heat treatment. Also, depending on the presence of a thermal bridge, profiles are divided into warm and cold. A warm system, in addition to the presence of insulation, is distinguished by the fact that it consists of two profiles connected by this insulation.

Aluminum extrusion manufacturer cycle of profiles structure

The profile structures of aluminum are made of aluminum grades A6, A5, A0, etc.. Aluminum alloy profiles must comply with the requirements of GOST 22233-2001.  Metal aluminum profiles must be made of aluminum tape in accordance with GOST 13726-78.

"Tape from aluminum and aluminum alloys or sheets "Sheets of aluminum and aluminum alloys". The following are not allowed on the surface of the profiles:

• cracks
• surface ruptures
• delamination
• deep risks.

In the field of enclosing structures, the range of extruded aluminum profiles includes:

1. architectural and construction system profiles
2. profiles for trade and exhibition equipment
3. profiles for ventilated façade substructures
4. cornice and auxiliary profiles

An アルミ押出メーカー carries the production of steel profiles in accordance with GOST 30245.

 Types of steel profiles:

• channel
• welded
• I-beam
• closed welded profile

アルミニウム押出メーカーがスチールプロファイルを使用するのはなぜですか？

The use of a bent steel profile due to its greater strength than that of an aluminum profile makes it possible to create visually lighter and thinner structures. Also, a steel profile is used in the construction of, for example, large-span structures.

Special types of metal profiles, architectural profiles are made to order. At the first stage, drawings are developed and approved in accordance with the customer's requirements. Then prototypes of the profile are made. The final stage is the release of the required batch.

Profile pressing

Today, profile pressing is widely used in the construction of structures, and especially in such structures:

• ドア
• ウィンドウズ
• partitions

Extrusion of aluminum

The pressing or extrusion process can be applied to both:

• aluminum profiles and bronze
• brass
• stainless steel or titanium

Due to アルミニウム押出成形メーカーaluminum extrusion has become famous globally.

How does aluminum extrusion manufacturer develop aluminum and steel?

The extrusion process makes it possible for aluminum extrusion manufacturer to produce aluminum profiles in widths from 10 to 800 mm. Thanks to an unlimited range of various cross-sectional shapes. The cost of tools for making a new extruded section from aluminum is much cheaper than for making a rolled steel section.

Moreover, the downtime of the extrusion press when changing the die is significantly less than rolling mil time. .