call icon +86-75523573416

บล็อก

บ้าน> การบล็อก> การProgramming เคล็ดลับในการ CNC เครื่องจักรกลของผลิตภัณฑ์อลูมิเนียม

Programming เคล็ดลับในการ CNC เครื่องจักรกลของผลิตภัณฑ์อลูมิเนียม

2020-03-28

Programming เคล็ดลับในการ CNC เครื่องจักรกลของผลิตภัณฑ์อลูมิเนียม

การเขียนโปรแกรมเป็นขั้นตอนที่ขาดไม่ได้ในการตัดเฉือนซีเอ็นซีของผลิตภัณฑ์อลูมิเนียม แต่มือใหม่หลายคนไม่เข้าใจการเขียนโปรแกรมเครื่องจักรกลซีเอ็นซี เมื่อตั้งโปรแกรมและใช้งานเครื่องจักรกลจำเป็นต้องหลีกเลี่ยงการชนกันในศูนย์เครื่องจักรกลซีเอ็นซี ต่อไปฉันจะแบ่งปันเคล็ดลับเกี่ยวกับการเขียนโปรแกรมในเครื่องจักรกลซีเอ็นซี

CNC machining of aluminum products

1.Using computer simulation software
With the development of electronic information technology and the continuous development of classroom teaching of CNC lathe machining, there are more and more software for CNC lathe machining simulation system, and its role is increasingly perfect. Therefore, it can be used to basically check the data and observe the fitness movement of the cutter to determine whether there is a collision.

2.Using the built-in simulation of CNC machining center to display the role of information
Generally, the excellent CNC machining centers often have the function of graphic display information. After entering the program flow, you can enable the graphical simulation to display the effect of the information, and observe the trajectory of the tool in detail to facilitate checking whether the tool will collide with the workpiece or fixture.

3. Utilize the empty operation function of CNC machining center
The accuracy of the trajectory of the infeed can be checked by using the dry operation function of the CNC machining center. After the program flow is entered into the CNC machining center, the tool or workpiece can be mounted, and then the empty operation button is pressed. At this time, the spindle bearing does not rotate, and the operating table starts automatically in strict accordance with the movement trajectory. Collision with the workpiece or fixture. However, under such circumstances, it must be ensured that the tool cannot be installed when a workpiece is provided; when the tool is installed, the workpiece cannot be installed, otherwise collision will occur.

4.Using the locking effect of CNC machining center
General CNC machining centers have a locking function (full lock or double shaft lock). When the program flow is entered, the Z axis is locked, and it can be distinguished whether a collision will occur based on the plane coordinates of the Z axis. The use of this effect should be bypassed by tool change or other operations, otherwise the program flow cannot be based.

5. การตั้งค่าพิกัดระนาบและการชดเชยคัตเตอร์ต้องเหมาะสม
เมื่อเริ่มต้นศูนย์เครื่องจักรกลซีเอ็นซีอย่าลืมตั้งค่าระบบพิกัดของเครื่องจักรกลซีเอ็นซี พิกัดระนาบของศูนย์เครื่องจักรกลซีเอ็นซีควรสอดคล้องกับการเขียนโปรแกรมโดยเฉพาะในแนวแกน Z หากข้อผิดพลาดเกิดขึ้นความน่าจะเป็นของการชนกันระหว่างเครื่องมือกลึงและชิ้นงานจะมีมาก นอกจากนี้ต้องกำหนดค่าชดเชยความยาวของเครื่องมือให้เหมาะสม มิฉะนั้นหากไม่มีการประมวลผลการผลิตที่ว่างเปล่าหรือมีการชนกัน

6. ปรับปรุงวิธีการเขียนโปรแกรมการ
เขียนโปรแกรมเป็นขั้นตอนที่สำคัญอย่างยิ่งสำหรับการกลึง CNC วิธีการเขียนโปรแกรมที่ปรับปรุงใหม่สามารถป้องกันการชนกันที่ไม่จำเป็นในระดับที่มาก

สรุปแล้วการเข้าใจวิธีการเขียนโปรแกรมของศูนย์เครื่องจักรกลซีเอ็นซีสามารถปรับปรุงประสิทธิภาพและคุณภาพของการผลิตและการประมวลผลโดยเร็วที่สุดและป้องกันข้อผิดพลาดที่ไม่จำเป็นในการผลิตและการประมวลผล สิ่งนี้ต้องการให้ผู้เริ่มต้นของศูนย์เครื่องจักรกลซีเอ็นซีเรียนรู้จากประสบการณ์จริงอย่างต่อเนื่องและปรับปรุงอย่างต่อเนื่องเพื่อเพิ่มความสามารถในการเขียนโปรแกรมและการผลิต หากในฐานะผู้เริ่มต้นระดับนี้ยังไม่เชี่ยวชาญมากนักเราควรเรียนรู้เพิ่มเติมและฝึกอบรมบุคลากรมืออาชีพและเทคนิคที่มีประสบการณ์มากมาย

mail top