call icon +86-75523573416

Блог

Дом> Блог> Сварка трением с перемешиванием (FSW) Плюсы и минусы: (FSW против ротационной сварки)

Сварка трением с перемешиванием (FSW) Плюсы и минусы: (FSW против ротационной сварки)

2020-11-23

Сварка трением: принцип, преимущества и применение

Friction Stir Welding (FSW)

Сварка трением с перемешиванием (FSW) - это разновидность сварки под давлением. Здесь плавление поверхностей происходит за счет преобразования механической энергии силы трения деталей в тепловую.

Сварка трением с перемешиванием (FSW) - что это?

Сварка трением с перемешиванием - это соединение с использованием давления. Это означает, что свариваемые детали будут нагреваться в результате трения друг о друга. Одна часть остается неподвижной, а другая вращается, что позволяет частям соединяться друг с другом.

This method is quite new. And, perhaps, not all specialists or amateur welders had time to get acquainted with such welding technology. Therefore, we will read the principles of its operation, advantages, disadvantages, parameters, features and varieties of this method in more detail.

In this article we will look at:

  1. Как Сварка трением с перемешиванием (FSW)works?
  2. What types of technology exist?
  3. What are the advantages and disadvantages of friction welding?

 

Application and types of Friction Stir Welding (FSW)

Generally, friction welding is commonly applicable in the following operations:

  • compounds of metals and alloys with a melting point of up to 1800 degrees
  • welding flat parts of the same thickness at a turned angle
  • longitudinal pipe welding
  • making bolts
  • Replacing soldering of small parts with machined surfaces.

Friction welding is suitable for joining contaminated parts, since it does not require their preliminary cleaning. Moreover, we remove the oxide film and grease at the beginning of mutual friction of the surfaces.
There are the following main types of friction welding :

Friction Stir Welding (FSW) suppliers

  1. oscillatory (linear)
  2. with stirring, with continuous drive
  3. radial
  4. orbital, inertial

Advantages and disadvantages of the method

The advantages of Сварка трением с перемешиванием (FSW) :

  • lower energy consumption compared to other types of welding
  • Moreover, a small number of defects
  • uniform structure of the weld
  • the ability to accurately control the process
  • Small amount of harmful emissions
  • Hence, high metal utilization rate
  • The ability to automate the process.

Friction Stir Welding (FSW) manufacturers

  1. Низкие требования к чистоте поверхности . Нет необходимости очищать поверхность свариваемых деталей. Боковые поверхности также могут быть неочищенными. Точно так же это значительно экономит время, затрачиваемое на вспомогательные операции.
  2. Возможность сварки различных металлов . Сварочный процесс позволяет сваривать как сплавы, так и одноименные металлы, а также разнородные сплавы. К тому же другие способы сварки здесь бесполезны. Например, можно приваривать сталь к алюминию, меди; алюминий с медью, титаном и так далее.
  3. Гигиенический процесс . Процесс сварки выгодно отличается отсутствием ультрафиолета.

Недостатки сварки трением с перемешиванием (FSW):

  • Сварка трением с перемешиванием (FSW ) даетограниченная применимость
  • громоздкое оборудование
  • Ограниченная поверхность соединения.

Сварка трением, принцип и особенности:

Сварка трением - это вид сварки давлением, при котором нагрев прекращается за счет трения, вызванного вращением свариваемого изделия.

Из-за возникающих сил трения в точках соприкосновения происходит очень быстрый нагрев и переход материала в пластическое состояние.

Таким образом, сварка трением представляет собой процесс, в котором механическая энергия, подводимая к одной из свариваемых деталей, преобразуется в тепло.

Сварка трением - это процесс преобразования механической энергии движения одной из частей в тепловую. Вращение - наиболее распространенный метод для этого. Точно так же может вращаться либо одна из деталей, либо вставка между ними. При этом части прижимаются друг к другу постоянным или возрастающим давлением. В этом случае нагрев происходит непосредственно на стыке деталей.

How does Friction Stir Welding (FSW) work?
Сварка трением с перемешиванием (FSW) process is not so simple. After the completion of the welding process, upsetting occurs and the rotation stops quickly.

In the welding zone at the joints of the parts, the following processes take place: with an increase in the rotation frequency of the workpieces and the effect of compressive pressure, the contact surfaces rub against each other.

Similarly, fatty and contact films present on parts in their original state are destroyed. After which the boundary friction comes by dry friction. Hence, individual micro protrusions begin to contact each other and deform.

Juvenile areas form, where the bonds of surface atoms do not saturate. Moreover, metal bonds immediately appear between them. In addition, they immediately destroy due to the relative movement of the surfaces.

Principles of using friction stir welding for joints

This process means that one does during its rotation. Moreover, it will create thermal energy, as a result of which the materials combines with each other.

But not only one of the parts can rotate, but also a special tool for friction stir welding in the form of an insert. In addition, it also contributes to a high-quality connection of parts.

Friction welding: technology features

 

Friction welding is a subtype of pressure welding. The technology involves heating the parts to be welded using friction. For this, one of them moves (rotates), while welding with the other.

Application area of Friction Stir Welding (FSW)

Сварка трением с перемешиванием (FSW)is most widely applicable in mechanical engineering, primarily in tool production. It is also common in the assembly of internals of nuclear reactors. Friction bonding of aluminum and magnesium alloy workpieces is popular in:

  • electrical engineering
  • electronics and
  • аэрокосмический

The technology is also common in transport engineering. The radial method is famous in the production of equipment for the mining and processing industries.

Вывод

More recently, Сварка трением с перемешиванием (FSW) has begun its journey in shipbuilding and food processing engineering.

Мы рассмотрели такой процесс, как сварка трением. Как видите, этот процесс сварки отличается от других и имеет множество преимуществ. Однако он достаточно специфичен и подходит не для всех задач. Тем не менее во многих случаях его использование оправдано.

 

Технология демонстрирует эффективность и тенденцию к замене традиционных методов сварки в таких областях, как:

  • для замены паяных и клепаных соединений;
  • Заменить контактную электросварку;
  • для восстановления изделий и сложных инструментов;
  • для приварки заготовок к подготовленным поверхностям
mail top