Blog

Trang Chủ> Blog > Các vấn đề phổ biến nhất trong quá trình đúc sáp bị mất thép không gỉ

Các vấn đề phổ biến nhất trong quá trình đúc sáp bị mất thép không gỉ

2020-10-02

Most Common issues in Stainless Steel Lost Wax Casting
stainless steel lost wax casting

In the thép không gỉ bị mất sáp đúc process, two molds are used. The first is made of a metal. It can be easily worked in the inverted shape of the piece. This comes in two halves usually.  Then, this mold is filled with wax to form the models. Hence, it is its final shape.

How stainless steel does lost wax casting model work?

These models are placed in a box. Moreover, these are filled with foundry sand. Later, an operator gives it heat until the wax melts. Similarly, he drips and another mold with the inverted shape of the piece.

This yes is filled with the molten metal. In addition, it gives rise to the piece. The advantages of this process are that several parts can be produced. Similarly, all parts come in a series with a high degree of detail and practically finished. Subsequently, the disadvantage is that the size of the pieces is limited.

What is casting?

The casting is the process where we mold different objects for multi purposes. In simple words, a metal comes in liquid state first. Later, it goes into a mold. Later, we can develop different shapes via thép không gỉ đúc sáp bị mất . So, we can use these molds for various industries.

In many cases, casting is the simplest and most economical process of producing a part.

The foundry can give rise to finished parts, already in their final shape, or not. In this case, they can undergo mechanical forming processes:

  • dimensional adjustments
  • welding or machining

But, in general, castings go through finishing processes such as:

  • Grooving
  • Gia công
  • and deburring

Khi cần thiết, các bộ phận cũng có thể được xử lý nhiệt. Nó cung cấp sức đề kháng lớn hơn vì thép không gỉ đúc sáp bị mất có độ bền cơ học thấp hơn.

Làm thế nào để biến mô hình sáp thành kim loại thông qua quá trình đúc sáp bị mất?

Tạo mẫu bằng sáp là một kỹ thuật trang sức để tạo hình bằng cách điêu khắc trên vật liệu. Kết quả là một miếng sáp. Hơn nữa, nó phải được biến thành kim loại bằng cách đúc với sáp bị mất.

Chúng ta có biết quá trình này không?

Bước đầu tiên là sản xuất thủ công mô hình bằng bạc hoặc sáp. Do đó, chúng tôi có hai điểm xuất phát khác nhau. Nó phụ thuộc vào vật liệu mà nguyên mẫu được tạo ra.

To transform the wax piece into metal, the model is attached to a rod, also made of wax. It forms a “tree “also. As the process takes time and energy, usually the thép không gỉ đúc sáp bị mất completes with several parts in the same structure.

Moreover, these models can be different too. The final formation of the structure resembles a tree. This “tree” is placed inside a metal cylinder. And the calcium sulfate coating is poured into it.

Wax trees for the stainless steel lost wax casting process

After the coating hardens the cylinder gets heat to remove the wax. This expels, leaving empty spaces with the negative forms of future pieces.
stainless steel lost wax casting SUPPLIERS

The metal is injected by centripetal force via thép không gỉ đúc sáp bị mất . It occupies the empty space left by the wax. After the metal has hardened, the coating is removed with cold water jets. The metal parts are removed from the “tree” with special pliers and go for assembly and finishing.

Serial reproduction

It is necessary to make copies of this piece or if the model is made of metal. The process begins by removing a rubber mold. This special rubber covers the pilot piece and is vulcanized. After heating, the rubber acquires a firm consistency.

Then, the rubber is opened, the pilot piece is removed. And, as a result, we have the negative shape of the pilot piece inside the rubber.

Models and rubber

By pressure, melted wax is injected into the mold. When the wax cools, we have a copy of the metal piece, only in wax. The wax piece is removed from the rubber mold. And it is ready to be used again. We can make as many wax copies as necessary.

The wax pieces are fixed on rods by stainless steel casting. It is also made of wax, forming a “tree”. And it follows the same process described above.

Stainless steel lost wax casting Problems

Some problems can occur during lost wax casting. The reasons for these defects to occur are diverse. Some of these causes are:

  1. When a hole occurs: poor quality wax or coating, overheated metal
  2. External balls occur: weak vacuum, lack of water in the coating mixture, badly beaten plaster
  3. When streaking occurs: excess water in the coating mixture.

What is the lost wax process?

Now let's talk about the theoretical part summarized for you to understand. In this type of production, a ceramic wrap is created around a prototype. It is usually made of wax or plastic. The prototype hardens to form the removable casting mold. It is called lost wax because during the process the liquid wax leaks. Moreover, it allows the initial piece to solidify.

Stainless steel lost wax casting process is repeated several times until you have the desired number of wax pieces. They are fixed in a structure that resembles a tree. It interconnects them all in a single entrance hole. This allows the temporary wax pieces to leave and the molten metal to enter.

Sau đó, cây được nhúng vào gốm và chạm vào cát. Tương tự, nó làm tăng sức đề kháng và làm cứng mảnh. Sau đó, cây này được nung lại để miếng có cấu trúc và độ cứng hơn. Điều này tạo ra một cấu trúc rỗng và cho phép không bị sốc nhiệt khiến cấu trúc bị phá vỡ.

thép không gỉ bị mất sáp đúc kết luận

Sự biến đổi của kim loại phụ thuộc chủ yếu vào thép không gỉ đúc sáp bị mất . Rõ ràng là quá trình đúc kèm theo một số quy trình và công đoạn. Ở đây, sự lựa chọn thích hợp của từng bước phụ thuộc vào dạng hình học của chi tiết, loại hợp kim cần đúc, số lượng chi tiết được sản xuất và chất lượng bề mặt mong muốn.

Các quy trình đúc chính là:

  • Đúc khuôn cát;
  • Đúc chính xác (mất sáp);
  • Đúc khuôn trọng lực vĩnh cửu;
  • Đúc áp lực;
  • Centrifugal casting;
mail top