የአሉሚኒየም የማስወጫ አምራች የማምረቻ ሂደቱን እንዴት ያካሂዳል?

የአሉሚኒየም ማስወጫ ምንድነው?

ለ አሉሚኒየም አተሩን አምራች, አተሩን ቋሚ መስቀል-ክፍል ጋር መገለጫዎች የሚደረጉበት ሂደት ነው. ቁሱ ከመጋገሪያ ክፍል ጋር በሟች በኩል ይገፋል ወይም ይጎትታል ፡፡ በዚህ ገጽ ላይ ከ ‹3D CAD› ዲዛይን እስከ ልዩ ቴክኖሎጂዎች ከአሉሚኒየም ማስወጫ ጋር የተያያዙትን ሁሉንም ርዕሶች መሸፈን እንፈልጋለን ፡፡

የአሉሚኒየም ማስወጫ አምራች የማስወገጃ ሂደትን እንዴት ይወስዳል?

ለአሉሚኒየም መገለጫዎች የኤክስቴንሽን ቴክኖሎጂ የሚከተሉትን ነጥቦች ያካተተ ነው-

1. የመጫኛ መሳሪያዎች ለስራ እየተዘጋጁ ናቸው;
2. የቴክኖሎጂ መሳሪያዎች - የፕሬስ ማጠቢያዎች ፣ የማትሪክስ መያዣዎች ፣ መሞቶች ፣ ማጠቢያዎች ፣ የድጋፍ ቀለበቶች ፣ የግፊት ቅሪቶችን ለማስወገድ ቢላዎች - ለሥራ ዝግጁ ናቸው ፡፡
3. በመጫን መሣሪያው በድንጋይ ተከላካይ ምድጃዎች ውስጥ ይሞቃል ፡፡
4. የአሉሚኒየም ምሰሶዎች በጋዝ ምድጃ ውስጥ ተጭነው ይሞቃሉ;
5. መገለጫው ተጭኗል;
6. በተንጣለለ ማሽን እርዳታ መገለጫው ተስተካክሏል;
7. መገለጫው ወደ ርዝመት ተቆርጧል;
8. የተቆረጡ መገለጫዎች በቅርጫት ውስጥ ይቀመጡና ወደ እርጅና ምድጃ ይላካሉ ፡፡

የአሉሚኒየም ማራዘሚያ አምራች አምራች የእርጅናን ሂደት ያካሂዳል ፡ የተጠናቀቀ መገለጫ የሙቀት ሕክምና ሂደት ነው። ከዚህም በላይ መገለጫውን በከፍተኛ ሙቀት ውስጥ ማሞቅ እና መጠበቁን ያካትታል ፣ ከዚያ በአየር ውስጥ ማቀዝቀዝ ይከተላል ፡፡

የአሉሚኒየም መውጣት ለምን?

The extrusion method allows you to end up with finished products with high strength rates. Similarly, it gives you confidence that your property will be reliably protected. The extrusion technology not only gives aluminum high strength, but also allows the profile to be reinforced with stiffening ribs. Due to which the protective roller shutters show such high results when tested for impact resistance.

The extrusion of a metal profile is the process of forcing or pulling an alloy through forming holes (matrix) under high hydraulic pressure. An የአሉሚኒየም ማስወጫ አምራች አምራች carries it in order to obtain a profile with a given cross-section.

The technological process of extrusion is carried out in extruders - devices for continuous processing of raw materials. The extruder for forming metal for the production of a profile consists of a:

• body with heating elements
• a screw that feeds the material into the extruder
• a temperature control system

 Depending on the number of screws, extruders are subdivided into:

• One
• Two
• three-screw

The main types of extruders, differing in the type of material supply, are disk and piston.

Different stages of aluminum extrusion of an aluminum profile

An የአሉሚኒየም ማስወጫ አምራች begins the extrusion of a profile with warming up the equipment. It is followed by the process of:

• pressing the profile
• then quenching by cooling with air
• straightening the metal profile by stretching
• cutting the profile in accordance with the measured length

The finished profile is subjected to aging - artificial or natural. The type of aging is determined by processing at different temperatures. The quality of the finished metal profile is determined by the absence of scratches and bubbles on the surface of the profile.  The durability of an aluminum or steel profile provides resistance to temperature and operational influences - up to 40 years.

According to expert አሉሚኒየም አተሩን አምራች, “Extruded profiles are subdivided into:

• solid and
• hollow

This process goes according to the type of material - without heat treatment. Also, depending on the presence of a thermal bridge, profiles are divided into warm and cold. A warm system, in addition to the presence of insulation, is distinguished by the fact that it consists of two profiles connected by this insulation.

Aluminum extrusion manufacturer cycle of profiles structure

The profile structures of aluminum are made of aluminum grades A6, A5, A0, etc.. Aluminum alloy profiles must comply with the requirements of GOST 22233-2001.  Metal aluminum profiles must be made of aluminum tape in accordance with GOST 13726-78.

"Tape from aluminum and aluminum alloys or sheets "Sheets of aluminum and aluminum alloys". The following are not allowed on the surface of the profiles:

• cracks
• surface ruptures
• delamination
• deep risks.

In the field of enclosing structures, the range of extruded aluminum profiles includes:

1. architectural and construction system profiles
2. profiles for trade and exhibition equipment
3. profiles for ventilated façade substructures
4. cornice and auxiliary profiles

An የአሉሚኒየም ማስወጫ አምራች carries the production of steel profiles in accordance with GOST 30245.

 Types of steel profiles:

• channel
• welded
• I-beam
• closed welded profile

የአሉሚኒየም ማስወጫ አምራች ለምን የብረት መገለጫዎችን ይጠቀማል?

The use of a bent steel profile due to its greater strength than that of an aluminum profile makes it possible to create visually lighter and thinner structures. Also, a steel profile is used in the construction of, for example, large-span structures.

Special types of metal profiles, architectural profiles are made to order. At the first stage, drawings are developed and approved in accordance with the customer's requirements. Then prototypes of the profile are made. The final stage is the release of the required batch.

Profile pressing

ዛሬ የመገለጫ መጫን በስፋት መዋቅሮች ግንባታ እና በተለይም በእንደዚህ ዓይነት መዋቅሮች ውስጥ በስፋት ጥቅም ላይ ውሏል ፡፡

• በሮች
• መስኮቶች
• ክፍልፋዮች

የአሉሚኒየም መውጣት

የመጫን ወይም የማስወገጃ ሂደት ለሁለቱም ሊተገበር ይችላል-

• የአሉሚኒየም መገለጫዎች እና ነሐስ
• ናስ
• አይዝጌ ብረት ወይም ቲታኒየም

Due to አሉሚኒየም አተሩን አምራች, በዓለም አቀፍ ደረጃ ታዋቂ ሆኗል ፡

የአሉሚኒየም ማስወጫ አምራች አምራች አልሙኒየምን እና ብረትን እንዴት ያዳብራል?

የማስወገጃው ሂደት የአሉሚኒየም ማስወጫ አምራች አምራች፡ ላልተገደቡ የተለያዩ የመስቀለኛ ክፍል ቅርጾች ምስጋና ይግባው ፡፡ ከአልሙኒየም አዲስ የወጣውን ክፍል ለመሥራት የመሣሪያዎች ዋጋ ከተጠቀለለው የብረት ክፍል ከመሥራት ይልቅ በጣም ርካሽ ነው ፡፡

Moreover, the downtime of the extrusion press when changing the die is significantly less than rolling mil time. .