Blog

Trang Chủ> Blog > Programming tips in CNC machining of aluminum products

Programming tips in CNC machining of aluminum products

2020-03-28

Programming tips in CNC machining of aluminum products

Programming is an indispensable step in the CNC machining of aluminum products, but many novices do not understand CNC machining programming. When programming and operating machining, it is necessary to avoid collisions in the CNC machining center. Next, I will share some tips about programming in CNC machining.

CNC machining of aluminum products

1.Using computer simulation software
With the development of electronic information technology and the continuous development of classroom teaching of CNC lathe machining, there are more and more software for CNC lathe machining simulation system, and its role is increasingly perfect. Therefore, it can be used to basically check the data and observe the fitness movement of the cutter to determine whether there is a collision.

2. Sử dụng mô phỏng tích hợp của trung tâm gia công CNC để hiển thị vai trò của thông tin
Nói chung, các trung tâm gia công CNC xuất sắc thường có chức năng hiển thị thông tin đồ họa. Sau khi nhập dòng chương trình, bạn có thể kích hoạt mô phỏng đồ họa để hiển thị hiệu ứng của thông tin và quan sát chi tiết quỹ đạo của dao để dễ dàng kiểm tra xem dao có va chạm với phôi hoặc vật cố định hay không.

3. Sử dụng chức năng vận hành trống của trung tâm gia công CNC
Có thể kiểm tra độ chính xác của quỹ đạo tiến dao bằng cách sử dụng chức năng vận hành khô của trung tâm gia công CNC. Sau khi dòng chương trình được nhập vào trung tâm gia công CNC, công cụ hoặc phôi có thể được lắp và sau đó nhấn nút thao tác trống. Tại thời điểm này, ổ trục chính không quay, và bàn vận hành sẽ tự động khởi động theo đúng quỹ đạo chuyển động. Va chạm với phôi hoặc vật cố định. Tuy nhiên, trong những trường hợp như vậy, phải đảm bảo rằng công cụ không thể được lắp đặt khi một phôi được cung cấp; khi gá dao thì không gá được phôi, nếu không sẽ xảy ra va chạm.

4.Using the locking effect of CNC machining center
General CNC machining centers have a locking function (full lock or double shaft lock). When the program flow is entered, the Z axis is locked, and it can be distinguished whether a collision will occur based on the plane coordinates of the Z axis. The use of this effect should be bypassed by tool change or other operations, otherwise the program flow cannot be based.

5.The setting of plane coordinates and cutter compensation must be appropriate
When starting the CNC machining center, be sure to set the CNC machining center machine coordinate system. The plane coordinates of the CNC machining center should be consistent with the programming, especially in the Z axis orientation. If the error occurs, the probability of the collision between the turning tool and the workpiece is very large. In addition, the tool length compensation must be set appropriately. Otherwise, if it is not empty production processing, or if there is a collision.

6.Improve programming methods
Programming is a particularly important stage for CNC lathe machining. The improved programming method can prevent some unnecessary collisions at a very large level.

All in all, grasping the programming method of cnc machining center can improve the efficiency and quality of production and processing as soon as possible, and prevent unnecessary errors in production and processing. This requires the beginners of CNC machining centers to continue to learn from the actual experience and continuously improve, so as to further strengthen the programming and production capabilities. If as a beginner this level is not very mastery, we should learn more and train more professional and technical personnel with rich experience.

mail top