Blog

Trang Chủ> Blog > Bạn có thể thực sự giá cả phải chăng nhôm đùn tùy chỉnh?

Bạn có thể thực sự giá cả phải chăng nhôm đùn tùy chỉnh?

2020-08-25

Các yếu tố góp phần vào chi phí của đùn nhôm tùy chỉnh

Nếu bạn nghĩ rằng nhôm đùn tùy chỉnh không phải là giá cả phải chăng, bạn đã tương tác với các nhà sản xuất sai. Bạn cần lập kế hoạch phù hợp để có được sản phẩm đùn tùy chỉnh không chỉ đúng thời gian mà còn trong phạm vi ngân sách.

Mặc dù thép là sự lựa chọn phổ biến trong các ngành công nghiệp, nhôm đang trở nên phổ biến theo thời gian. Rốt cuộc, nó có rất nhiều thứ khác để cung cấp. Nó đảm bảo khả năng chống ăn mòn, độ bền, sức mạnh, trọng lượng, nhiều tùy chọn hoàn thiện và bảo trì thấp.

Hơn thế nữa, với nhôm, các kiến ​​trúc sư và nhà thiết kế sản phẩm có thể đạt được những điểm đến có thể là một giấc mơ đối với thép. Dù sao thì nhôm cũng đóng góp đáng kể vào các nỗ lực phát triển bền vững, nó là một trong những vật liệu được tái chế nhiều nhất trong ngành.

Đùn nhôm: Các yếu tố quan trọng

Kinh phí và tính khả thi là hai yếu tố chính chi phối quá trình đùn nhôm tùy chỉnh. Đây rốt cuộc là vấn đề về kích thước vòng tròn cùng với trọng lượng cần thiết của hình dạng trên mỗi foot tuyến tính. Mặc dù, sự kết hợp nghe có vẻ vô cùng phức tạp.

Tuy nhiên, chúng tôi có thể đảm bảo với bạn rằng nó khá dễ nắm bắt. Nói một cách dễ hiểu, nó là tỷ lệ giữa kích thước hồ sơ và độ dày của vật liệu. Sine các máy ép đùn khác nhau về khả năng của chúng, việc tìm kiếm cái phù hợp với bạn nhất là vấn đề quan tâm xung quanh.

For instance, if you have a profile that has a section area ranging between 1 to 2.5 square inches and it has a diameter that is 1 to 10. Finding an aluminum extruder for this particular profile would not be a challenging task. Since it lacks complexity, most extruders would be able to do a good job.

On the contrary, if you want a profile that requires a circumscribed circle greater than 14 inches, dia and the cross section is greater than 10 square inches. This is something challenging and only experienced extruder such as the Essaii would be able to handle it with perfection.

Custom Aluminum Extrusion suppliers

Cost Factors

Die is the major contributor to the cost of the extrusion process. You would likely have to pay for 1000 of dollars for the die. However, this cost is not significant when compared to the entire architectural project.

In addition, in most cases, the lead times are usually less than a month. So, these factors would contribute the custom extruding’s affordability. For example, the revisions required, or the full-scale prototyping.

Other factors adding to the project cost include the custom-made check-fixtures along with the tools that are required for the bending machine.  In order to cut down the overall custom extrusion expense, you should consult an experienced and relevant extruder.

Design Guidelines

Even though the extruded shapes have some limitations, yet they do offer design freedom and substantial versatility. Since custom aluminum extrusion is creating a new profile form the scratch instead of purchasing off-the-shelf profile, therefore you have different options.

Tùy thuộc vào bạn để lựa chọn kích thước, hình dạng, cấu trúc và các khía cạnh khác của nhôm định hình. Dưới đây là bảng cơ bản để thiết kế hướng dẫn.

Custom Aluminum Extrusion manufacturers

Lựa chọn hợp kim

Khi nói đến việc lựa chọn hợp kim, nhôm cung cấp nhiều loại nhiệt độ và hợp kim khác nhau. Ví dụ, đối với các ứng dụng xây dựng và tòa nhà, các nhà sản xuất sẽ giới thiệu lại dòng 6XXX. Mặc dù một số hợp kim khác có thể cung cấp sức mạnh lớn hơn.

Tuy nhiên, dòng 6XXX rất tốt cho khả năng dẫn điện. Nó có sự kết hợp tốt nhất của các tài sản cho việc kinh doanh xây dựng. Các hợp kim cần xem xét là 6005A, 6061, 6063 và 6060.

Thiết kế hồ sơ

Khi bạn liên hệ với nhà sản xuất đùn nhôm tùy chỉnh có kinh nghiệm, bạn sẽ nhận được thông tin đầu vào về thiết kế hồ sơ. Tiếp cận máy đùn là điều bắt buộc nếu bạn chưa quen với máy đùn. Bạn sẽ ngạc nhiên khi biết rằng sự khác biệt nhỏ trong thiết kế có thể dẫn đến giảm đáng kể về mặt chi phí.

Đối với những người mới bắt đầu, bạn cần phải suy nghĩ thấu đáo. Chúng tôi đồng ý rằng I, C, L và hình chữ nhật hoạt động tốt cho một số ứng dụng, nhưng sau đó bạn không cần đùn nhôm tùy chỉnh. Bạn sẽ có thể tìm thấy hầu hết các hình dạng này ngay khi xuất xưởng.

Tiếp theo, điều quan trọng là giữ cho thiết kế đơn giản để đảm bảo thành công của việc thực hiện trong khi vẫn giữ được chi phí. Hãy xem một số mẹo hiệu quả dưới đây.

  1. Sử dụng bán kính và góc nhẹ nhàng.
  2. Giữ lưỡi càng nông và càng rộng càng tốt
  3. Đảm bảo độ dày đồng đều của các bức tường.
  4. Thiết kế trong khi có sự đối xứng trong tâm trí của bạn.

When we say unique, we don’t mean complex. By unique, we mean a design that serves the purpose while being eye-catching and bold.

Surface Specifications and Tolerances

You easily find the industry-standard tolerances online. However, a good and reliable custom aluminum extrusion manufacturer would ensure tolerance higher than the industry standards. After all, they plan to delivery only the best.

So, a good way to go about this is to talk to your extruder. They would be able to provide you with the required information as well as how the acquiring the standards would impact your overall cost. At this stage, you should also discuss the project visibility as well as the surfaces that are associated with these particular areas.

Structural Considerations

There is no denying that creating optimal structure is more than one-time cycle. It is an iterative process that starts with the functions. It then moves through a number of forms, joining methods and geometry considerations.

For start, you should consult the aluminum design manual. It consists of the aluminum basis for the construction as per the international building standards along with aluminum structures specifications.

Custom Aluminum Extrusion offers Different Finishing

Once you extrude, the aluminum promptly creates a tenacious oxide film. The purpose of this film is to provide additional protection against corrosion. In most cases, you won’t require additional finishing.

However, if you want to enhance the physical appearance or sever service conditions, you would need additional finishing. Do bear in mind that the additional finishing would increase the cost. So, do these finishing only when they are a must.

To further know how this finishing would impact your project cost, you should talk to your extruder. They are the best source to acquire authentic and reliable information.

mail top