판금 스탬핑 개념 및 관련 프로세스

Sheet metal is one of the most stable materials used in the infrastructure project. However, it must first be pressed and molded in a process called sheet metal stamping in order to achieve the effect desired for the construction project. sheet metal as one of the stable materials for any project is one of the common approaches. To make it work efficiently; however, you will need to understand the concept of stamping sheet metal and how they work in the production process. There are various steps and options that are used for everyone, and all of them will change the way you use the board.

The basic idea is to have a machine or use a procedure that presses the metal into the correct shape. There are several types of stamping that will affect the metal and the results obtained in different ways. The configuration of a metal by bending, wrapping, weaving, piercing, or coating are some of the common shapes that are used for sheet metal. Each of the types of stamping used will have different procedures that are combined with the basic material to obtain the correct results and the most effective shape of the metal.

When you start working with sheet metal stamping, you will notice that different procedures are used, depending on the shapes you want to create. In some cases, stamping will go through a machine that automatically changes the shape of the metal with a single stamping. In other cases, it is necessary to use several steps, each of which will continue to redefine the metal in the desired form and create a different and more complex result for the material.

판금 스탬핑과 함께 사용되는 최신 개발을 시뮬레이션이라고합니다. 이는 특정 형태의 금속 제조를 보장하면서 생성 된 형태에 일관성을 부여하기 위해 만들어진 기술입니다. 사용 된 기술은 금속과 함께 작동하는 다양한 요소를 결합하여 금속 형성을 자동으로 변경하는 동시에 대체 절차와 함께 사용할 때 금속에서 발생할 수있는 기능 장애를 보호합니다.

판금 스탬핑에 사용되는 장비 유형

판금 스탬핑에는 유압 프레스와 기계 프레스의 두 가지 유형의 장비가 있습니다.

Hydraulic presses use hydraulics to create a force that the operator can control. They could process anything from 20 tons to several thousand tons. They are effective in providing the expected power and are best used for deep drawing, molding (the type of force, not type of displacement), and coating or molding.

On the other hand, mechanical presses use a mechanical flywheel, which can supply the energy necessary to provide the necessary effort when it comes time to pierce any material. Their size varies from 20 to 6000 tons. Those wishing to perform surface drainage and semi-finished products at a much higher speed should use mechanical presses instead of hydraulic ones.

In this operation, the board is trimmed and then formed into a preferred shape. Although several different types of special machines can be used in the stamping process from sheet metal, the three most important basic elements are needed: a stamping mold, a stamping press, and the sheet metal from which the part will be made.

How does the stamping sheet metal process work?

The basic concept of stamping a sheet metal is the use of a machine for pressing metal to a given shape. The shapes can be simple, like a ring, like washers, and of different widths. More complex forms include spirals and electrical contacts in various forms. The metal sheets are usually formed by bending, embossing, weaving, coating, coating, and piercing. Each method gives the metal a different purpose, and often two or more methods are used to achieve the desired shape.

As today's electronic and infrastructural technologies change so quickly, the need for specialized sources increases dramatically. More complex Stamping Sheet Metal procedures must be performed to create a spring or wheel that serves a specific purpose in a structure or machine.

Most finished products are created on one machine in one process. Nevertheless, more and more stampings are carried out in several stages, which redefine the metal in the desired shape, at the same time its strength and durability. In recent developments, the stamping process is carried out by simulation. Through this process, the final metal products are obtained in perfect shape and with consistent quality.

Most Stamping Sheet Metal operations include cold stamping, with the exception of the specialized Stamping Sheet Metal method, commonly known as hot stamping. Essentially, this means that heat is not intentionally introduced into the sheet or mold. It is important to remember that although stamping is a cold stamping process, heat is generated. Cutting / forming sheets creates friction between the mold and the metal, similar to the heat and friction that occurs when rubbing hands. Since heat is generated by friction during cutting and molding, when stamped parts come out of the molds, they are often very hot.

An accurate understanding of this type of stamping is important for companies that make things the size of a microchip, and for those who produce things the size of a body for different car models. They could have their own machines and equipment for Stamping Sheet Metal, or they could just hire the services of metal stamping companies that could produce the necessary parts and deliver finished products to them. There are many other important factors to consider when printing stamps. Since Stamping Sheet Metal is a very common production process in the industry, it is best for companies to have the necessary equipment and knowledge to accurately and accurately complete this operation.

결론

Whether you are working on automotive parts or you need sheet metal for a specific project, this is an opportunity to improve the material you need. The stamping sheet metal is one of the common approaches for modifying and modeling metal, so it can help you with any project. The production, design, and use of this material becomes easier to use and gives you a suitable fit when working on various parts and projects.