In vergelyking met gietstukke en smeedstukken hou die verwerking van presiese stempelonderdele ooglopende voordele in. Metaalstempel kan werkstukke lewer wat moeilik is om met ander verwerkingsmetodes te vervaardig. Vanweë die gebruik van presisievorms kan die werkstuk se akkuraatheid die mikronvlak bereik en die herhaalbaarheid is hoog. In die verwerkingsproses moet ons die werking in beginsel standaardiseer om die kwaliteit van ons verwerkte produkte te verseker. Algemene voorsorgmaatreëls vir die verwerking van presiese stempeldele van metaal, kom ons kyk hieronder.

First, the stamping die problem
The quality of precision metal stamping is largely determined by the stamping die. The quality of a metal stamping part is mainly affected by the mold design ideas and mold materials. If the quality of the stamping die is not good, it will lead to a significant reduction in production efficiency, stamping accuracy and service life.

Second, the transportation of stamping parts
When the metal stamping parts are transported, they must be packed well. Because during the logistics transportation process, the stamping parts will be deformed or scratched due to bumps.

Third, the stamping plant production problems
Attention should also be paid to the level of workers' stamping operations. Many metal stamping factories also do not have a perfect training system, which results in workers having no awareness of product quality and operating punches in violation of regulations, resulting in product quality problems. On the other hand, the wages of stamping workers are low, the labor intensity is high, and the working environment is harsh, and the product quality will be affected. In the stamping plant, bumps and scratches on the surface of the product caused by the rough actions of the workers can often be seen.

Vierdens, sakeondernemingsbestuurskwessies
Die departement van gehalte-inspeksie van presisie-metaalstempelondernemings speel 'n belangrike rol in die hele onderneming, en die afdeling vir gehalte-inspeksie moet onafhanklik wees. Die gehalte-inspeksiedepartemente van baie ondernemings is verbonde aan ander departemente en kan nie onafhanklik wees nie. Dit het groot probleme veroorsaak vir die gehaltebeheer van metaalstempelonderdele.