Blog

Shtëpi> Blog > Cilat janë hapat në procesin e përpunimit të mykut?

Cilat janë hapat në procesin e përpunimit të mykut?

2020-03-23

Cilat janë hapat në procesin e përpunimit të mykut?

Procesi i përpunimit të mykut është nga prerja te përpunimi dhe mbarimi. Themeluar është një prodhues i pajisjeve dhe mykut plastik. Unë do ta ndaj me ju dhe shpresoj t'ju ndihmoj.

mold processing process

Materiali prerës: materiali i kallëpit të përparmë, materiali i kallëpit të pasmë, materiali futës, materiali i rreshtit, materiali i sipërm i pjerrët;

Open frame: front mold frame, rear mold frame;
Thickening: the front mold core is thick, the rear mold core is thick, and the parting line is thick;
Copper males: front male copper males, rear male copper males, and parting line milling copper males;
Line cutting: insert parting line, copper male, inclined top pillow;
Computer gong: fine gong parting line, fine gong mold core;
Spark discharge: rough front mold, copper male, male mold wire surface milling, rear mold bone position, pillow position;
Punching, pin eye, die thimble;
Row position, row position pressure pole;

Inclined top

Compound mold thimble, equipped with mold thimble;
Others: ① Tsui Tsui, die pits, waste nails (limit switch nails); ② flying molds; ③ water parts, braces, elastic yellow, and water;
Provincial mold, grinding and polishing, front mold, rear mold bone position;
Fine water structure, support rod screw hook, elastic yellow
Heat treatment, surface nitriding;
Repair printing.

Expertise in stamping dies

Design basis
Specification accuracy The accuracy of the specification between the two.
According to the actual requirements and functions of all the products of plastic products, it is clear which type of external quality and actual specifications belong to:
Plastic products with high appearance quality requirements and low specification accuracy requirements, such as small toys;
Versatile plastic products with strict specifications;
The appearance and specifications are strictly plastic products, such as digital cameras.
Is the die tilt effective?
The inclination of the ejection is related to the ejection and quality of the plastic product, which is related to the entire process of the injection.
There is sufficient inclination of the die;
Pjerrësia duhet të integrohet me pjesën e ndarjes ose ndarjes së produktit plastik në formim; nëse do të rrezikojë saktësinë e pamjes dhe specifikimeve të trashësisë së murit;
A do të rrezikojë rezistencën në shtypje të disa pjesëve të produkteve plastike?

Rrjedha e programit të dizajnit

Analiza dhe tretja e vizatimeve të produkteve plastike dhe vijave të ngurta (stilet):
A. Pamja gjeometrike e produktit; B. Specifikimet, tolerancat dimensionale dhe standardet e skemës së dizajnit;
C, standardet teknike; D, emri plastik, modeli E, rregulloret e sipërfaqes
Totali i zgavrës dhe Renditja e kavitetit:
A. Pesha neto e produktit dhe sasia e injektimit të makinës për injeksion; B. Zona e zhvilluar e produktit dhe forca shtrënguese e makinës së injektimit;
C. Madhësia e mjetit gërryes dhe sipërfaqja e arsyeshme totale e mjetit gërryes të instaluar në makinën e injektimit (ose hapësirën brenda shufrës mbështetëse të makinës së injeksionit)
D. Saktësia dhe ngjyra e produktit; E. Nëse produkti ka një bërthamë të boshtit anësor dhe zgjidhjen;
F. Manufacturing large quantities of products; G. Economic benefits (manufacturing value of each mold)
After the total number of cavities is clear, the sorting of the cavities is carried out, that is, the layout of the cavity parts. The sorting of the cavities involves the specifications of the grinding tools, the design plan of the pouring system software, the balance of the pouring system software, and core pulling (rail slider) The design scheme of the organization, the design scheme of the inserts and cores, and the design scheme of the heat exchanger system software. This problem is related to the selection of the clinical diagnosis surface and the gate location. Therefore, the actual design scheme should be carried out throughout the process. Necessary adjustments to achieve a more extreme design solution.

Clarification of clinical diagnosis

Does not harm the appearance;
It is beneficial to ensure the accuracy of the commodity, mold manufacturing, and the production and processing of the cavity;
Design schemes beneficial to pouring system software, drainage system, and refrigeration system;
It is beneficial for the ejection (parting, ejecting) to ensure that the product is left on the side of the movable mold when ejecting;
Facilitates the distribution of metal inserts.

Design scheme of pouring system software

The design of the pouring control system includes the selection of mainstream product lanes, the clarification of the cross-section appearance and specifications of the separation lanes, the selection of the gate location, the gate method, and the clarification of the gate cross-sectional specifications. The fall of the tunnel should also pay attention to the design scheme of the gate device, and the gate structure of the gate of the gate device.
When designing the pouring system software, the first step is to select the gate location. The selection of gate locations is related to the smooth formation of the product and the entire process of injection. The selection of gate locations should follow the following criteria:
① The gate should be selected on the clinical diagnosis surface as much as possible to facilitate the removal of the gate during mold manufacturing and application;
② The distance between the gate and each part of the cavity should be as consistent as possible, and the number of steps should be minimized;
③ The position of the gate should ensure that when the plastic is injected into the cavity, the cavity is wide and thin, and the thin-walled part is convenient for the satisfactory injection of the plastic;
④ The gate should be set at a thicker cross section of plastic parts;
⑤ Prevent plastic from impacting the cavity wall, core or insert when it flows down, so that plastic can be injected into various parts of the cavity as soon as possible, and prevent deformation of the core or insert;
⑥ Minimize the melting marks caused by the products, or the uncritical parts of the products caused by the melting marks;
The gate location and plastic injection orientation should be such that when the plastic is injected into the cavity, it can be injected symmetrically along the orientation of the parallel plane of the cavity, which is beneficial to the exhaust of gas in the cavity;
The gate should be set on the part that is easy to remove on the product, and the appearance of the product should not be endangered as much as possible.

mail top