Anfängerhandbuch zur Verwendung von Prototyping-Tools

Der Begriff " Hersteller von Rapid Prototyping " kann zu häufig verwendet werden. Aber dieses Mal werden wir zur Wurzel zurückkehren und ihre Nützlichkeit in der heutigen Zeit überdenken.

Hersteller von Rapid Prototyping  ist ein Begriff, der hauptsächlich im Bereich Rapid Prototyping verwendet wird. Die Methoden reichen von Lochzeichnungen über Papiermodelle bis hin zu Apps und 3D-Druckern.

Im Allgemeinen wurden in der Vergangenheit Prototypen durch Arbeit hergestellt. Sowie:

• Rasieren
• Holz
• Massenmaterialien,
• Und schärfen.

History and a little background of Rapid Prototyping

Hersteller von Rapid Prototyping technique is particularly suitable for productions in very small quantities. Simultaneously, it is the most versatile of the three. Moreover, it is also the simplest and quickest to implement. So that online 3D printing services have developed.

People responsible for the development of new products and experiences have long used prototyping as a way of creativity. They used to explore and test hypotheses.

By simplifying the concept, we can understand the concept. Similarly, we can make good decisions. There are two main ways companies can prototype new products and services.

1. "Rapid prototyping"
2. and "pilot".

However, we have realized that we need a new approach. That should lie somewhere in between these two.  In the real market, a consumer distracts due to the noisy environment without investing heavily in pilots.

 

We seek to provide value to customers and market appeal. Furthermore, we call this approach “live prototyping”.

To understand the value of live prototyping, let's compare it to the two main methods mentioned above. Hersteller von Rapid Prototyping emphasizes quantity over quality.

To get a feel for the ideas, a manufacturer creates dozens of sketches and models. At the other end of the spectrum are "pilots" and "technical prototyping."

They usually aim to be as close as possible to the "correct answer".  And thus offer a complete experience with almost no omission. Similarly, Rapid Prototyping Hersteller can enjoy massive earning.   Technical prototyping is created to assess technical feasibility or the benefits of new technological approaches.

Both of them are positioned in the pre-production stage. So a Hersteller von Rapid Prototyping requires considerable investment. And they are required to be very close to the final version.

 

Difference from 3D printer

Large-sized modeling machines are so expensive. They were limited to Hersteller von Rapid Prototyping and some major companies.  But in recent years, compact and low-priced rapid prototyping has emerged.

In addition, this small, low-cost printer is sometimes called a 3D printer. The spread of 3D printers mainly in the manufacturing industry is rapidly progressing.

Moreover, it is being used for various purposes.  So in recent years it is often called 3D printer rather than rapid prototyping.
With the advent of these 3D printers, more and more Rapid Prototyping Hersteller is introducing them in-house.

"3D printer" is a personal printer for home use.
After purchasing, you can use it from the moment you wake up in an empty space in the room. Similarly, you can plug the power cable into the outlet.

Three essential elements for Hersteller von Rapid Prototyping of hardware

Die Grundelemente des Hersteller von Rapid Prototyping  sind hauptsächlich:

1. Software zur Entwicklung der Bewegung der Software.
2. Rapid Prototyping erfordert die schnelle Entwicklung der oben genannten drei Elemente, um als eine Sache zu wirken.

Prototyping-Tools - Die von uns verwendeten Prototyping-Tools sind hauptsächlich:

3. Elektrischer Einplatinencomputer
4. Schaltung CAD
5. Maschinen / Mechanik
6. 3D CAD
7. 3D Drucker
8. Laserschneider

Diese Tools sind in verschiedenen Situationen sehr nützlich, insbesondere beim Prototyping.

Vorteile des Rapid Prototyping-Herstellers

Die Vorteile des Prototyping sind:

Nacharbeit verhindern

Indem dem Kunden das Bild des Produkts frühzeitig gezeigt wird, ist es möglich, die Lücke zwischen den Bedürfnissen des Kunden und dem Produkt zu erkennen. Daher kann es frühzeitig möglich sein. Darüber hinaus verhindert es Nacharbeiten nach Abschluss.

You can gradually reflect the deviation noticed by prototyping in the next prototype.  And gradually bring the product closer to customer needs.

Prevent recognition gaps between team members

Forming at an early stage can prevent misrecognition among team members. A requirement definition document that is often created by software development cannot provide the final image. By creating a prototype, team members can proceed with development while agreeing.

Prevent specification bloat

By prototyping and verifying, Hersteller von Rapid Prototyping can notice unnecessary features.

3. Precautions for Rapid Prototyping Manufacturer

Excessive verification slows down speed

When you start prototyping, you're faced with the question. "How much do you prototype and verify?" It may take too much verification to slow down the development process.

Edges can be picked up by listening to user requests too much

If you show the prototype and get the user's opinions, various opinions will come out. Furthermore, there are some personal requests from users. Such as "Is it better to use blue for this button?”

Incorporating all of these will eliminate the edge of the product. It is important to identify "mere desires" and "generic and essential needs."

4. What is the development process centered on prototyping?

Below is an example of a Smartphone app development process that incorporates prototyping.

Discover issues and solutions to solve

Before prototyping, you need to define the issues and solutions you want to solve. This uses methods such as lean startup.

Hersteller von Rapid Prototyping manufactures models and prototypes based on CAD models of 3D objects. It gives better performance in a shorter time and with techniques different from injection.

Rapid Prototyping Manufacturer Injection molding

The injection molding is a manufacturing process by injecting a molten material into a mold. Subsequently, the geometry of the mold is generally defined using a file from CAD.

Among the many materials compatible with this process, the thermoplastic and thermosetting polymers will be those essentially used.

Likewise, for this type of application, the molds will rather be made of aluminum to limit costs and delays. It is a widespread process for prototyping. Moreover, it has a number of advantages, including:

• quantity:the cost price of prototypes is inversely correlated to quantity
• a very good surface condition;

The dimensions of the prototype: small or large, there are few limits to the dimensions of the prototypes.

Die CNC-Bearbeitung

Machining with numerical control by computer is a process which consists in manufacturing parts by subtraction of material. Hersteller von Rapid Prototyping does it with machine tools controlled by a digital computer.

Im Allgemeinen wird die CNC-Bearbeitung sowohl auf Metallen als auch auf Kunststoffen durchgeführt. Die Werkzeugmaschine akzeptiert verschiedene Dateiformate aus CAD oder computergestützter Fertigung.

Die Betriebskosten sind relativ niedrig. Die Skaleneffekte sind jedoch nicht signifikant. Im Gegensatz zur Kunststoffinjektion wird diese Technik für mittlere und große Serien nicht empfohlen. Es ist jedoch besser für Serien von zehn Stück geeignet.

Hier sind einige Vorteile dieser Technik im Zusammenhang mit Rapid Prototyping:

• hohe Genauigkeit ;
• geeignet für metallische oder plastische Materialien;
• ausgezeichneter Oberflächenzustand der Teile;
• relativ niedrige Produktionskosten;
• Vielseitigkeit der Produktion.
• 3d Drucken

3D printing, or additive manufacturing, appeared in the late 1980s. It refers to a set of techniques which consist of depositing material. Hersteller von Rapid Prototyping makes the object from a file from CAD or a 3D file.

One of the advantages of this technique is the manufacture of complex parts. We cannot achieve it by more traditional prototyping techniques. This prototyping method has the following advantages, among others:

• great freedom in authorized forms
• precision
• speed
• great latitude in the design phase
• Because the manufacturing constraints are less.

Although there are many manual processes, it took time and money to produce. But with the advent of RP machines, it has become easier to design and confirm designs.