There are many forms of stamping dies. And according to the nature of the workpiece, the mold structure and mold material are classified.

According to the nature of the process:

1. Punching dies along the closed or open contour line to make the material separate mold. Such as blanking die, punching dies, cutting die, cutting die, trimming die, cutting die, etc.

2. Bending die makes the sheet blank or other blanks deform along a straight line (bending line), so as to obtain a certain angle and shape of the workpiece mold.

3. The drawing die is a die that makes the blank of the sheet material into an open hollow piece, or further changes the shape and size of the hollow piece.

4. The forming mold is a mold that directly shapes the rough or semi-finished workpiece according to the shape of the convex and concave molds, and the material itself only produces local plastic deformation. Such as bulging die, shrinking die, expanding die, undulating forming die, flanging dies.

5. The riveting die is to use external force to connect or overlap the parts in a certain order and manner, and then form a whole according to the degree of process combination.

Process Combination

1. Single-process die In one stroke of the press, only one die of the stamping process is completed.

2. There is only one station for the compound mold. In one stroke of the press, two or more stamping processes are completed at the same station at the same time.

3. The progressive die (also called a continuous die) has two or more stations in the feed direction of the blank and completes two or two passes at different stations in one stroke of the press The mold for the above stamping process.

4. The transfer mold combines the characteristics of single-process mold and progressive mold. Using the robot transfer system to achieve the rapid transfer of products within the mold can greatly improve the production efficiency of the product, reduce the production cost of the product, save the material cost, and have stable quality reliability.

According to the classification of product processing methods, according to different product processing methods, the molds can be divided into five categories: punching and shearing molds, bending molds, drawing molds, forming molds and compression molds.

Stamping Dies Applicable Materials

1. The deep drawing process depends on the balance of metal ductility and compression resistance. Suitable metals are steel, copper, zinc, aluminum alloy, and other metals that are easy to tear and wrinkle during the deep drawing process.

2. Because the ductility of the metal directly affects the production efficiency and quality of deep drawing, it is generally processed with metal flakes as raw materials.

Stamping Dies Design Considerations

1. The internal diameter of the cross-section of the parts formed by deep-drawing should be controlled between 5mm-500mm (0.2-16.69in).

2. The preliminary length of deep drawing is 5 times the inner diameter of the section.

3. Semakin lama panjang bahagian itu, semakin tebal kepingan logam, jika tidak, pemecahan permukaan akan berlaku semasa pemprosesan. Kerana semasa proses regangan, ketebalan kepingan logam secara beransur-ansur akan berubah.

Secara amnya, penggambaran kali, kedalaman lukisan mati satu pukulan dapat dilukis sekali, pengiraan pekali lukisan bahagian lukisan umum adalah diameter selepas peregangan / diameter sebelum peregangan, iaitu m1 = d1 / D0. Nisbahnya adalah 0,48 ~ 0,5, yang mudah ditarik jika lebih kecil. Nisbah regangan terakhir ialah 0.8 ~ 0.82.