Блог

Додому> Блог> Обробка металевої оболонки: тип та виробничі характеристики

Обробка металевої оболонки: тип та виробничі характеристики

2020-09-19

Обробка металевої оболонки: тип та виробничі характеристики

Metal-shell-processing

Питання, що стосуються матеріалу:

  • Про матеріали, з яких виготовлений металевий кожух
  • Тип металевої оболонки пластини
  • Технологія виготовлення оболонки з листового металу
  • Щодо ергономіки та охолодження металевих корпусів

Обробка металевої оболонки використовується для виготовлення сучасних комп’ютерів, а точніше, системних блоків. Кожен системний блок містить велику кількість елементів, які відповідають за роботу всього ПК. Сюди входять блоки живлення, материнські плати, оптичні накопичувачі, жорсткі диски тощо.

There are many types of sheet metal boxes, which are manufactured according to their technology. In addition, it is important to provide cooling and ergonomics in the equipment. The type of metal made into the case plays an important role. Generally, there are many nuances in the process of manufacturing computer equipment. If you want your computer to work normally for a long time, you should understand them.

Materials used to make metal casings

При виготовленні металевих кожухів для комп’ютерних технологій потрібні матеріали з певними характеристиками, що ускладнює вибір. Вони повинні забезпечувати необхідний захист компонентів комп’ютера від вібрації та будь-яких механічних впливів. У той же час вони повинні сприяти швидкому охолодженню теплогенеруючих компонентів під час роботи обладнання. Тому алюміній зазвичай вибирають для виготовлення повноцінних корпусів,

Manufacturing-metal-casing

Причина криється в характеристиках металу. Він має найкращу тепловіддачу та тепловіддачу. Мідь має таку ж якість, але алюміній легший і дешевший. Однак металеві оболонки пластин, виготовлених із SECC (спеціальної сталі), покритих розчинами електроцинкування, отримали більш широке застосування. Вони використовуються в середньому ціновому сегменті комп’ютерних технологій.

Recently, aluminum has become the most commonly used housing material due to its value. The structural properties of aluminum and its appearance provide designers with huge opportunities

Тип металевої оболонки пластини
Mass production requires strict manufacturing standards for various types of products. This applies to almost all industrial fields, and computer technology manufacturing is no exception. Compliance with the standard not only allows you to be confident in the strict parameters of the components used, but also allows you to assemble equipment from components designed and produced by a large number of suppliers.

The conditions for further use constitute the standard size of the product. For ease of use, the housing has certain characteristics. There is still no perfect standard. 25 standard sizes are now used. These are not only metal shells for mass production, but also single shells designed to solve special problems. The latter is specifically needed by narrow experts. Most people's interests extend to the former, and we will consider them in the future.

1. Single piece.

It is a single unit of PC system equipment, monitors, speakers and other components. Except for the system unit, the latter is usually an external device, but not in this case. The size of the product is not standardized and only meets the manufacturer's standards.

Monolith

Найвідоміші - це пристрої Apple. Ці монолітні "Маки" досі є одними з найнадійніших і найкрасивіших товарів на ринку.

Перевагою цієї ситуації є її компактність, тобто найменший простір, який займає весь пристрій. Однак це також є його недоліком. Таке обладнання важко модернізувати. Через брак місця всередині оболонки неможливо змінити упаковку, зробити вдосконалення та встановити більш потужні компоненти.

Ось чому весь будинок насправді не придатний для сімейного використання, коли власник не планує модернізації. Тому їх часто використовують у виробництві. Корпус, як правило, прямокутний і виготовлений з металу. Вони оснащені електронними компонентами, а порти підключення та різні індикації розташовані на задній та передній панелі корпусу. Вони встановлені в 19 стійках, одна над одною. У цьому випадку задня стінка верхнього корпусу стає верхньою стінкою нижнього корпусу. Зараз цей компонент став основним компонентом для встановлення телекомунікаційного обладнання та серверів.

Див. Також: Принципи лазерного різання: використовувані техніки та обладнання

Загальний блок - це конструктор, який використовується для побудови комп’ютера. У цьому випадку компонент уже встановлений у ньому. Власник такого пристрою може просто замінити в ньому оперативну пам’ять, процесор або жорсткий диск. Але, наприклад, практично неможливо замінити материнську плату. У будь-якому випадку це спричинить серйозні труднощі.

Якщо власник за кілька років планує змінити її на більш сучасну цукерку, він може придбати домашню цукерку, оскільки модернізація складна. Але для організацій монолітні блоки зручні тим, що дозволяють швидко створити кілька обладнаних комп’ютером робочих місць.

2. AT і Slim.

Наприкінці минулого століття, на початку комп'ютерної ери, корпуси для ПК виготовляли за стандартами AT. Сьогодні це пішло в минуле, і зараз використовується стандарт ATX. Але на цій основі вони створили зразки для Slim та Ultraslim. Це надтонкі і надтонкі оболонки. Їх головне призначення - виглядати стильно. В іншому випадку вони будуть не дуже зручними, оскільки встановлювати в них серйозні наповнювачі не вийде - місця занадто мало.

AT і Slim

Цей стандарт оболонки дуже популярний у західних країнах, але не в Росії. Заощаджений виробником простір привернув західних покупців. Зрештою, ви можете поставити компоненти комп'ютерної системи на стіл, а монітор - поверх нього.

Деякі з найбільш часто використовуваних типів горизонтальних металевих корпусів для ПК:

Desktop computer (desktop computer) with a size of 533x419x152 mm;
Footprint (floor) 408x406x152 mm;
SlimLine (thin type), the size is 406x406x101 mm;
UltraSlimLine (ultra-thin) 381x352x75 mm.
3. The vertical (tower) metal casing of the notebook computer.

A computer case placed vertically in space is called a "tower" or tower. Experts believe that in this case, in order to quickly cool the PC, the components should be placed as easily as possible.

Vertical (tower) metal computer case

In this case, consumers will find the most convenient option for themselves. It may be the case of modern servers, or only for devices with typewriter capabilities.

Consider the most popular ATX vertical chassis in Russia:

They are also called "full towers". The size in this case is 200x600x1000 mm. There are 5.25" and 3.5" bays inside, the first of which is used to accommodate optical drives (4-9 can be), and the second is for hard drives (6-12). In addition, seven expansion cards can be placed in the tower. This is the sound card, receiver, etc.
In addition to the above, in this case, you can also place an ATX motherboard (standard size) so that you can assemble a server or a high-performance gaming computer. There will be enough space to accommodate various other equipment.

BigTower or "Big Tower". The size in this case is 190x482x820 mm. In addition to full towers, they can also provide full-size ATX motherboards, but there is nowhere to install other equipment. In this case, it can also be used to create a game computer.
These are the most famous and commonly used standard hulls in our country-the "middle tower". Their dimensions are 183x432x490 mm. This kind of case can accommodate power supply equipment, ATX board. RAM (2 slots) and hard drives (several) can be built-in. This is the most versatile case because it can be used to assemble office computers or powerful gaming PCs, or you can make a media center for your own home.
The size of this "tower" is 178x432x432 mm. The chassis is very small and can be assembled into a home computer or home theater. Such a body takes up very little space.
MicroTower is the smallest vertical metal enclosure. The size of this baby is even smaller. It is suitable for low-power devices with motherboards with built-in peripherals.
Manufacturing technology of sheet metal shell
Let us consider the various methods used to manufacture metal casings used to manufacture electronic devices.

Cold plate stamping.
The housing of the electronic equipment (CEA) is made by cold stamping sheet metal. Although this method has been used for a long time, it has not lost its relevance. Its essence is to use special stamps. It is used for the production of mass products and the start of mass production. The role of the mold is to form different parts of the body. For small batches and single products, this technique is impractical because of the high cost of manufacturing stamps.

Sheet metal processing.
Moreover, in many cases, the housings of electronic devices are made by sheet metal processing methods. This technology is used for the production of small batches of products. For example, the developer chose a specific metal housing design. Then, he needs to decide how to do it: commission a separate development based on certain requirements or use a ready-made model to make some adjustments for himself.

Choose the method of manufacturing the shell according to the batch size. When planning a large number of instruments, individual design and use of cold stamping methods in manufacturing should be considered. In the production of small and medium batches, it is worth using ready-made solutions. At the same time, the sheet metal processing of the material will help make necessary changes to the design during the production process, after which the product will completely correspond to the manufactured equipment.

Use CNC machine tools.
The housing of electronic equipment can also be produced on CNC machines (computer numerical control). This is a fairly popular method. With its help, small batches of cases and single copies can be made. It should be noted that the cost of such products is very low. It is believed that with this output, the use of CNC equipment is economically feasible. These machines are compact and do not require a large footprint, which makes manufacturing products cheap.

Moreover, the use of CNC equipment can reduce the number of experts working for it. This means that the human factor in production is reduced, so that the product is of high quality, but the defects are actually eliminated. These advantages make it possible to use the device not only in small-scale housing production, but also in the manufacture of large-volume products.

Ergonomics and sheet metal housing cooling
Earlier, we mentioned one of the main functions of a computer case-to dissipate heat from the heating element of the system unit. The increase in the number of fans cannot prevent overheating due to the specific cooling of PC components. The best results can be achieved by placing the fan correctly and thus organizing the movement of air inside the device.

There is no need to evaluate the ventilation system installed on the PC by the number of coolers. With their help, heat is dissipated from the heating element. If the cooling system is not installed correctly, the hot air currents will collide with obstacles or each other, making it impossible to cool the equipment.

Below is a photo of a relatively reasonably constructed ventilation scheme for a metal computer case. After careful inspection, you will find one or several low-speed coolers (at the input) installed in the case. They suck cool indoor air into the system unit. A smaller and more powerful fan is placed behind (at the outlet) to blow out the heated air. This circuit allows you to generate thrust. Therefore, the metal body is a cooling turbine, in which cold air enters the heating element, they are cooled, and then the system guides the heated air to the outside.

See also: bent aluminum tube

The proposed solution can also be supplemented with coolers located near the side walls and the top wall. They must blow out the air.

Therefore, in order to create a system that properly cools the metal PC case components, you should remember:

Більша кількість вентиляторів не означає кращого відведення тепла.
Рух повітря в одному напрямку повинен бути організований, а не розділений на повітряні потоки.
Зі шкільної програми ви можете знати, що тепле повітря завжди буде підніматися, тоді як холодне повітря падатиме, тому вам не слід розміщувати вертикальні системні блоки горизонтально.
Вільні кабелі всередині пристрою перешкоджатимуть циркуляції повітря.
Вентилятор з великими лопатями та низькою швидкістю збільшить потік повітря.
Необхідно ретельно враховувати кількість повітря, яке вентилятор може вдути в шасі за одну хвилину.
Ергономіка та охолодження корпусу з листового металу

Цей параметр називається CFM-кубічними футами на хвилину. Слід забезпечити безперервну циркуляцію повітря в камері. Щоб розрахувати, який вентилятор може забезпечити цю функцію, вам слід:

Calculate the area of ​​the case. To do this, multiply its length by its width and height.
Calculate the CFM of the cooler.
For example, the volume of a 253x502x563mm box is 2.52 cubic feet. The air in the box should be changed every 2 seconds, so a 70 CFM cooler is required. Sometimes, you will find a PC with vents that cool the processor in the form of a tube on the side of the case. They are of little benefit, but they are more harmful because they create obstacles to the natural flow of air. They should be removed and fixed in the wire casing.

Dust filters (such as ducts) also cannot help the fan to cool the components of the computer. Within 2-3 months from the date of installation, they will soon be clogged with indoor dust, so their performance is very low. In addition, the mesh clogged with dust can interfere with the movement of the air, causing the device to overheat. Therefore, the productivity of this equipment is low.

The screws that used to support all PC components have gradually become history. During the computer assembly/disassembly process, a large number of screws are inconvenient to use. Everyone who has analyzed a system analyzer knows this.

This is the reason why manufacturers have long used plastic buttons and "bases" for hard drives to complete computer technology.

In addition, clamps, plugs, additional fasteners, etc. are used, which makes the box more convenient. The ergonomic chassis helps you replace components and upgrade your computer internally and externally.

It is worth paying close attention to the cables located inside the chassis. The efficiency of cooling systems depends on their location. However, we must not forget the convenience of connecting new devices and devices.

Why contact us
We respect all customers and strictly execute tasks of any scale.

Our production facilities enable us to process various materials:

Non-ferrous metals;
cast iron;
stainless steel.
When completing the order, our experts will use all known metal processing methods. The latest generation of modern equipment can conform to the original drawings to the greatest extent.

In order to make the workpiece closer to the sketch proposed by the customer, our experts use universal equipment designed for jewellery polishing tools for particularly complex operations. In our production workshop, metal becomes a malleable material, which can be used to manufacture any workpiece.

The advantage of contacting our experts is that they meet GOST and all technical standards. In each stage of work, strict quality control is carried out, so we guarantee to provide customers with carefully implemented products.

Thanks to the experience of our craftsmen, the output is a model product that meets the most demanding requirements. At the same time, we start from a strong material foundation and focus on the development of innovative technologies.

We cooperate with customers in various regions. If you want to place an order for metal processing, our manager is always ready to listen to all situations. If necessary, we can provide customers with free professional consultation.

mail top